Telephone or TEXT 24/7 @ 360 410 1949
NICKS FORZA FERRARI
USA's premier Capristo exhaust systems dealer
This is a programmable remote exhaust valve control ECU and key fob set for OEM and Capristo exhaust valves, which opens and closes exhaust valves on exhaust systems fitted with a pressure port. The reason to have exhaust back pressure control is to obtain a better engine torque band and to maintain derivability in a wide range of conditions. Today’s high performance engines prefer a free flowing exhaust at wide throttle openings and high rpm. At smaller throttle openings and low rpm encountered in traffic, a slight increase in exhaust backpressure, results in better low end torque and a more user friendly engine. This pressure is controlled by one or a set of butterfly valves in the exhaust system.
With this programmable valve control unit the opening and closing points of the exhaust valves can be set to your preferences. The exhaust control unit constantly monitors the backpressure in the exhaust system while driving. Under acceleration the backpressure increases and at a preset pressure the controller opens the exhaust butterflies. This releases the backpressure and increase the exhaust gas flow and horsepower.
Three control modes are available. The first is a cruise mode in which the valves will open later and at higher exhaust pressure levels. This allows for a quieter and more comfortable drive. The second is a sport mode, which allows a quicker opening of the valves for a more aggressive style of driving. The third mode leaves the valves in the open position. This is oriented towards track use where higher rpm and constant full throttle application requires a free flow of exhaust gases. The opening and closing points for the first two modes are user programmable within certain safety limits. A PDF file is available with programming instructions.
The key fob supplied with the kit is a stylish unit with two extra buttons that could be used on other equipment capable of receiving the signals. This kit can be integrated with an OEM or Capristo exhaust that is equipped with an exhaust pressure port. An on board self-learning function allows you to program more key fobs should the need arise. An added safety feature is a failsafe condition, which allows the exhaust valves to go to the open position in case of an electrical or vacuum failure. This prevents engine and or header damage from excessive heat build up. The supplied wiring harness is already fitted with connectors for the solenoid valve and controller. The power supply and ground wire are the only wires that need to be ended for your specific application. This makes for an easy and no fuss installation.
Price $ 1100.00
With this programmable valve control unit the opening and closing points of the exhaust valves can be set to your preferences. The exhaust control unit constantly monitors the backpressure in the exhaust system while driving. Under acceleration the backpressure increases and at a preset pressure the controller opens the exhaust butterflies. This releases the backpressure and increase the exhaust gas flow and horsepower.
Three control modes are available. The first is a cruise mode in which the valves will open later and at higher exhaust pressure levels. This allows for a quieter and more comfortable drive. The second is a sport mode, which allows a quicker opening of the valves for a more aggressive style of driving. The third mode leaves the valves in the open position. This is oriented towards track use where higher rpm and constant full throttle application requires a free flow of exhaust gases. The opening and closing points for the first two modes are user programmable within certain safety limits. A PDF file is available with programming instructions.
The key fob supplied with the kit is a stylish unit with two extra buttons that could be used on other equipment capable of receiving the signals. This kit can be integrated with an OEM or Capristo exhaust that is equipped with an exhaust pressure port. An on board self-learning function allows you to program more key fobs should the need arise. An added safety feature is a failsafe condition, which allows the exhaust valves to go to the open position in case of an electrical or vacuum failure. This prevents engine and or header damage from excessive heat build up. The supplied wiring harness is already fitted with connectors for the solenoid valve and controller. The power supply and ground wire are the only wires that need to be ended for your specific application. This makes for an easy and no fuss installation.
Price $ 1100.00
